|
ShenZhen HSM stepper Motor Electric Co., Ltd
|
3DM860D 3 Phase Unipolar DC Brushless Motor Driver
| Place of Origin: | Zhejiang, China (Mainland) |
|
|
| Add to My Favorites | |
| HiSupplier Escrow |
Product Detail
3DM860D 3 Phase Unipolar DC Brushless Motor Drive
3DM860D 3 Phase Unipolar DC Brushless Motor Driver
DC brushless motor controller Features
- SPWM, Speed/Current alike close loop technology, smooth rotation
- Smooth torque output within speed range (8000 rpm Max.)
- 1:75 Max. speed regulation ratio
- 60°/300°/120°/240°Electrical angle adjustable
- Speed regulation: potentiometer adjust / Analog input
- Run/Step, Quick Brake, CW/CCW rotation shift
- Speed output, Alarm output(O.C.)
- Over current, over voltage, stall, missing speed Alarm
Parameters
Electrical Parameters(Tj25ºC)
|
Power |
2450VDC, Capacity:up to motors |
|
Current output |
Rated 15A, Peak 45A(≤3s) |
|
Driving mode |
SPWM |
|
Insulation Res. |
500MΩ |
|
Dielectric Strength |
500V/Minute |
|
Weight |
About 300g |
Ambient requirement
|
Cooling |
Self cool |
|
Environment |
Keep away from oil, dust, and acid gas |
|
Temperature |
0ºC50ºC |
|
Humidity |
80RH |
|
Vibration |
5.7m/s2.Max. |
|
Storage temp. |
20ºC125ºC |
Function description
- Power Supply: DC+ ; DC-
Voltage: 2450DC, normally Linear Power Supply applied(appendix), ripple voltage higher than 50V may damage driver. The output current of LPS shall be 60more than that of driver. In case of switching power supply(strongly recommended)applied, please pay attention to the current shall meet motor’s current.
Attention: incorrect connection may cause driver damaged.
- Speed regulation choice(RV ; AVI)
1.Setup speed by potentiometer (RV).The dipswitch SW2 must be ON status to enable this function. CW rotate the potentiometer will increase speed. CCW- speed down.
2.Setup speed by analog input (AVI). The dipswitch SW2 must be OFF status to enable this function..AVI terminal accept 05V voltage or PWM signal from controller.AVI terminal with input resistance of 100K, current consumption≤5mA.
Reference table
